Wireless IR Remote Receiver for the Nakamichi 730 Receiver
3/3/2010 - I'm down to my last Nakremote RM-730 Wireless Receiver. It's available for immediately delivery. I am contemplating another run of boards, but, due to the low demand for this product I might not bother.
Contact me at p9019 @yahoo.com
Check out my new Nak 730 Web Page with lots of pictures and stats from recent eBay auctions.
Check out my other wireless receivers:
NEW IR Remote Receiver for the Nakamichi ST-7 AM/FM Tuner
Nakamichi Tape Deck Wireless Remote Receiver (RM-50AP and RM-580AZ)
Revox B77, PR99 Wireless Remote Receiver
The unit is about 2.6" by 2.6" by 1.1" tall and can easily sit on top of the receiver or on the side.
On the front is a Infrared window through which you can see a Power/Activity LED. The LED stays lit when powered and blinks off when a IR command is received.
The back of the unit has a cable that connects to the remote jack on your Nakamichi 730 Receiver.
No AC adapter is required. It draws it's power from the 730 Receiver
All the functions of the original RM-730T are support.
Power, Preset A, Preset B, Preset C, Preset D, Volume Up, Volume Down, Tuning Up and Tuning Down.
Use ANY universal remote. Just program it for Sony TV and you're ready to go.
Comes with a universal
remote preprogrammed to work with the 730 Remote Receiver.
There are jumpers on the board for configuring the Sony remote device code that the unit responds to, but, only the Sony TV setting supports all the buttons.
|
J1
|
J2
|
|
|
Jumpered
|
Jumpered
|
Sony Beta VCR |
|
Open
|
Jumpered
|
Sony VHS VCR |
|
Jumpered
|
Open
|
Sony Tuner |
|
Open
|
Open
|
Sony TV |
Pricing
730 Wireless
Remote Receiver with 3 in 1 universal remote for $60. Shipping within the